Viking longship: Did you mean...?

Search

Search Results

Dividing the Log
Image

Dividing the Log - Viking Ship Construction 17

In the Viking timber yard, the logs were divided into halves, then quarters, then eighths, and then into even smaller sections. The goal was to cut fibres with a saw, but to open the wood along its natural...
Protective Tar Coating
Image

Protective Tar Coating - Viking Ship Construction 25

In Viking shipbuilding, tar served not only to cover the fibre between the planks but also gave the outer hull additional protection. A mixture of wood, tar and linseed oil coated the outer surface...
Defining the Vessel
Image

Defining the Vessel - Viking Ship Construction 2

The work of building a Viking ship began by determining the type and purpose of the vessel. Whether it would be a warship, a cargo boat, or a coastal craft was decided, and the hull length, need for lightness...
Searching for Curved Timber
Image

Searching for Curved Timber - Viking Ship Construction 10

In clinker Viking ships, branches and trunk junctions with natural curves were vital for making frames without cutting the fibres. This search for curved timber required extensive scanning within...
Axe-Based Production
Image

Axe-Based Production - Viking Ship Construction 18

At this stage, the saw had almost disappeared from the process of Viking shipbuilding, and production relied mainly on cleaving and axe hewing. Ship planks were made by opening the log along the grain...
Shaping the Land
Image

Shaping the Land - Viking Ship Construction 26

The edges where the planks overlapped on a Viking ship were not left random. The contact surfaces, called the land, were carefully shaped, and even if they were not perfectly smooth, the seating line and...
Selecting the Oak
Image

Selecting the Oak - Viking Ship Construction 3

The Viking shipbuilders did not enter the forest at random. They first searched for large, straight-grown, knot-free oaks capable of yielding broad planks, because a clinker hull would not forgive poor...
Choosing Ash
Image

Choosing Ash - Viking Ship Construction 11

Ash was preferred by Viking shipbuilders for oars and for parts exposed to heavy impact. Thanks to its toughness and high shock resistance, ash offered the ideal engineering solution for ship components that...
Removing Sapwood and Pith
Image

Removing Sapwood and Pith - Viking Ship Construction 19

The split pieces were roughly shaped in the Viking timber yard, and the sapwood and pith were removed. The remaining core became stronger and more reliable timber for the clinker overlap. Charcoal...
The Clinker Overlap
Image

The Clinker Overlap - Viking Ship Construction 27

In the clinker system of a Viking ship, each new plank overlapped the one below. This overlap acted like a structural spine that strengthened the hull along its length and kept the ship light yet remarkably...
Support Us Remove Ads