Under the Seljuk rule, Persia gained a period of economic and cultural prosperity. The innovative techniques of the Seljuk period and style in architecture and the arts had a strong influence on later artistic developments. Seljuk art is a fusion of Persian, Islamic, and Central Asian (Turkic) elements, and building masonry is probably the most eminent feature of the Seljuk contribution to Islamic Art and Architecture.

In the Seljuk period, stone was the principal building material, though they also used bricks to construct small Masjids and Tomb Towers, as well as minarets. In the larger stone structures, brick was added for embellishment, predominantly placed in the upper structures and rarely in the interior. Since the 10th century CE, decorative brickwork has developed in two ways. Firstly, there are brick bonds that are constructive and laid during the structural process. Secondly, there are brick revetments, which are assembled from precast sections. The production and brick selection differ to a great extent between these two types of brickwork. However, both share a common aspect: dependence on geometry. With bonds, standard-shaped bricks are laid out in modular geometric patterns, whereas with revetments, the bricks are re-cut to fit into a unique design layout for each use.

This article is a comparative analysis of the variations in the styles of the Seljuk era manars (minarets) including samples from those seen in Isfahan and four other Iranian regions. The following questions provided the guidelines for the research:

  1. What are the contributions from the Seljuk era to the architecture of manars in Iran?
  2. What are the salient architectural features of the manars of Isfahan in the Seljuk era?
  3. What are the differences and the similarities in the style of manars between Isfahan and four other regions in Iran?

The development of style and design in Seljuk manars has had a significant effect on architecture across Iran, influencing several other structures like the tall and slender towers attached to mosques to make the azan (call to prayer).1 In Iran, manars —one of the most characteristic features of the Iranian cityscape— are known for typically having a cylindrical brick shaft, which indicated the presence of nearby mosques or other religious buildings.

Although manars are now a common feature of Iranian religious architecture, early mosques in Iran had relatively low structures – the great domes and aivans (porticos) commonly seen today, were not instituted until circa 1040 to 1157 CE. The characteristic cylindrical form of the mosque tower was found throughout Iran, Iraq, and the Hijaz well before the Seljuks arrived there in 1037 CE. Subsequently, the Seljuks and their successors brought the cylindrical-style brick tower, with its octagonal shape, into the newly conquered lands of Afghanistan, India, Syria and Anatolia.2

That there are so many 11th and 12th century CE buildings still standing in Iran today indicates that their time of construction was a prolific one, which coincided with the arrival of the Seljuk Turks. The Seljuk arrival meant that these tall brick towers no longer had to be placed next to the mosque, they started building them next to other types of religious buildings and, occasionally, on their own.

A few manars of this period served non-liturgical functions. Some, located along major routes or at the edge of the desert (Khusraugird; Ziyar; Mil-I Nadiri), acted as signposts. Since much caravan travel was done at night, a lamp at the top of a minaret allowed the building to serve as a lighthouse (familiar in Khurasan). In a few cases, the minaret was built on top of a hill where there was no room for a mosque anyway.3

In addition to the Seljuks' contributions to the function and style of manars in Iran, the Seljuk began pairing manars for the first time. The idea further developed in the 12th century CE, when paired manars were used to add extra importance to the entrance gate of buildings (Nakhchivan; Ardistan) – something that was revealed in the pre-war excavations at the Sasanian city of Bishapur (Nakhchivan Ardistan). 4

Paired manars would later be used inside mosques to border the entrance to the sanctuary as well as to indicate direction. When the minaret was built as an integral component of the mosque, its entrance was not at the ground level but, instead, was off the roof of the mosque, which we can tell today by the existing doorways, high up the shaft of what are now freestanding manars.

The following is a survey of the literature on some of the important manars in Isfahan during the Seljuk era, with an in depth analysis of their architectural design and style.

Following are four cases of randomly chosen manars from different Iranian regions, Khurasan, Mazandaran, Bukhara, and Shahrestan, for the purpose of comparative analysis.

The manars of Isfahan serve liturgical and non-liturgical purposes alike. The manar of Barasian, the Friday mosque, the manar of the destroyed mosque of Sarban, the manar of the Friday mosque in Sin, and the manar of Ali mosque are all examples of manars with a liturgical function. That these manars are attached to a mosque is a clear sign of its use as a religious building and are used to chant the call for prayer. But the minarets of Chihil Dukhtaran and the Gar have secular purposes, functioning as lighthouses to guide travellers.

The shafts of the manars in Isfahan in the Seljuk era are usually built with baked bricks. These shafts stand on a circular base as in the case with the manar of Sarban, and the manar of the Friday mosque in Barasian; however, the manar of Chihil Dukhtaran has a square base and the manars of Gar and the Friday mosque in Sin have octagonal bases. Moreover, rubble stone is used for building some bases.

Not all the manars of Isfahan have decorative crowns. For example, the Sarban manar has a crown with mouqrnas underneath and the manar of Ali mosque has two balconies that crown the shaft. These crowns have bands below with inscriptions. On the other hand, the manars that have no crowns only have bands with geometric shapes made of bricks —as with the manar of Barasian— or inscriptions —as with the manar of Chihil Dukhtaran that is made of terracotta— or tile —as with the manar of Sin. These inscriptions are mostly in Kufic or in both Kufic and Naskhi, as with the manar of Gar.

The shaft is decorated with broad horizontal bands of geometric ornamentation, often separated by bands and inscriptions, which display the full range of the brick-masons' talents in terms of nonlinearity and heterogeneity as in the manars of Sarban and Chihil Dukhtaran. Subsequently, this manar has colourful, glazed tiles on top of the molded brick, as was seen in the manar of Sin.

The shaft of all the manars is circular and tapered to make the manar more solid and stable in spite of its height, which ranges between 21 metres as in the manar of Gar and 48 metres as in the manars of Sarban and Ali mosque. The brick patterns are used decoratively while providing structural support. The bricks here are placed in geometrical shapes as with the manars of Gar, Chihil Dukhtaran, Sin, Sarban and Ali mosque. The three last manars are distinguished by their blue glazed tiles.

In the four Iranian regions of Khurasan, Mazandaran, Bukhara, and Shahrestan, manars share certain similarities yet are substantially different from those of Isfahan.

The manars of the four groups, as well as the manars of Isfahan, serve both liturgical and secular functions, for example, the manar of Golpayegan in Shahrestan. The manars of Saba in Mazandaran and Vabkent in Bukhara are secular, serving as lighthouses. However, unlike the manars of Isfahan, there is an example of a double-purpose manar: although the Khurasan's Kirat manar is not attached to a mosque, its balcony indicates that it was used to host a call for prayer. Since this manar was built on a hill, it was also likely used as a lighthouse to guide travellers. In all four regions, manars were constructed with baked bricks. However, they used wood to strengthen the balcony with manars like that of Kirat or to decorate that of Golpayegan.

Sophisticated and lavish decorating styles, as those revealed in the manars of Vabkent and Sava, are used more often in the manars of the four regions than in Isfahan. The manar of Vabkent is characterized by a lantern at its top, which is ornamented with highly sophisticated mouqrnas on its top and bottom. Moreover, this manar is characterized by narrow bands symmetrical vegetal inscriptions all along the shaft. The manar of Sava has three decoration zones, which are separated by bands of inscription in Kufic and Naskhi. Some shafts have blind arcading on the top, as is the case with the manar of Golpayegan.

While the manar of Sava is decorated with some terracotta, the analyzed sample of other manars in Isfahan shows use of tiles as a decorative element. However, the manars of Isfahan and those in the four regions previously mentioned share the same shape base, which is either circular as with the manars of Vabkent and Sava or octagonal as with Kirat and Golpayegan.

Usually the manars in Isfahan and the four regions all have short lower octagonal shafts, with the exception of the Kirat. In this manar, the shaft has two parts: the lower, with a high octagonal base, and the upper, with a circular shaft separated by a balcony in the middle.

In conclusion, the manars of Isfahan are excellent examples to examine in order to understand the style and function typical of manars created during the Seljuk period. Manars in Isfahan were built to serve both religious and secular purposes, usually with baked bricks and minimal ornamentation. However, in the four other Iranian regions, the use of wood added both strength and a greater flare for lavish decoration. These two features, of wood and ornamentation, are the most blatant differences between the manars of the four regions and those of Isfahan. However, all of the manars made good use of the Seljuk's solid building techniques, which has protected them from the elements for centuries after their construction.

___________________________________________________________________________________________________

1 Hutt, & L. Harrow, Islamic Architecture (London:1978) color plate 6 and 7.

2 D. N. Wilber, The Architecture of Islamic Iran: Ilkhanid period (Princeton: 1969) 47.

3 Ibid

4 J.Bloom, Minaret Symbol of Islam (Oxford:1989) 157.

5 M. Smith, “Material for a Corpus of Early Iranian Islamic Architecture. ii. The Manārs and Masjed, Barsian (Isfahān),” Ars Islamica 1 (1936): 1 to 40.

6 A.Daneshvari, A Stylistic and Iconographic Study of the Persian Tomb Towers of the Seljuk Period (University of California 1977).

7 W. Blunt, 1966. Isfahan: Pearl of Persia (New York: 1966) 41.

8 R. Hillenbrand, Islamic Architecture (Cairo: 2000) 154.

9 O. Grabar, The Great Mosque of Isfahan (New York: 1990).

10 H. G. Ali. Mimari-i Islami-i Iran dar dawrah-i Saljuqian (Tehran: 2000) 107.

11 D. Wilber Donald , The Architecture of Islamic Iran: The Il-Khanid Period (New York: 1955) 119 to 120.

12 R. Hillenbrand, Islamic Art and Architecture (Cairo:2000)105 to 108.

13 W. Blunt, Isfahan: Pearl of Asia (London: 1966) 114.

14 R. Hillerbrand, Islamic Art and Architecture (Cairo:2000) 105 to 108.

15 S.Blair and J. Bloom, The Art and Architecture of Islam (Yale :1994).

16 G. Michell, Architecture of Islamic World (London:1978).

17 B. O'Kane, Studies in Persian Art and Architecture (Cairo:1995) 33 to 34.